1. Before use
- 9 -
Failure to follow the instructions below may cause a machine failure.
1) When washing the machine, do not splash water on the engine (electrical parts, near
the air cleaner, fuel cap, etc.) and the place where the warning label is affixed.
2) Check and adjust the clutches, throttles, gear changes, etc. sufficiently.
3) When applying the seat, wait "about 5 minutes or more" after stopping the engine and
check the cooling condition of the muffler and the engine body to prevent burns and fire.
1.6 At the time of storage
1) For safety, be sure to close the fuel cock.
2) When storing this machine for a long time, store it indoors.
3) Remove dust, deposits and foreign matter from the main body and working parts.
1.7 Warning display mark
1) Be sure to read the warning display mark before use, fully understand it, and be sure to
follow it.
2) If the warning display mark becomes difficult to see, replace it so that it can always be
clearly identified.
To Next Page
Loading...
