4.運転・作業のしかた
- 27 -
4.3.1 How to load and unload
② Please load in the forward direction and unload in the reverse direction.
② Use a bridge that meets the standards.
③ Put the diff lock lever in the "on" position, the cutting height adjustment lever in the "move"
position, and do not put it in any other position.
③ Set the throttle lever to the medium speed position.
4.4 How to make good mowing work
When mowing on flat ground (squares, etc.)
In order to prevent scattering to the outside of the field, mow
the grass counterclockwise from the outside to the inside,
leaving about one row of grass on the outside.
After cutting, cut the remaining outer grass clockwise.
When mowing in an orchard
To eliminate damage to the trees due to scattering, mow the
grass so that it passes through the right side of the trees as
much as possible.
To Next Page
Loading...
