4.運転・作業のしかた
- 24 -
③ Depress the parking brake pedal deeply to release the brake stopper. Never operate the
change pedal (shift lever) with the parking brake pedal
"locked". It will force the braked wheels to be driven, which
will overload the brakes and transmission and lead to
damage.
④ Slowly move (depress) the shift lever (change pedal)
forward to move the unit forward.
Never operate the change pedal (shift lever) with the parking brake pedal
"locked". It will force the braked wheels to be driven, which will overload the brakes and
transmission and cause damage.
Reference；
The traveling speed changes steplessly depending on the angle at the shift lever (change
pedal) is tilted. Release your foot off the change pedal, it will return to the neutral "N" position.
4.2.2 How to stop (park)
When the parking brake pedal is depressed, driving stops and the shift lever
and change pedal return to the neutral "N" position at once and stop, but make it a habit to
use the shift lever or change pedal for normal driving stop operation. Especially when
driving at high speeds, stepping on the parking brake pedal or releasing the foot from the
change pedal may cause physical shock to the operator due to a sudden stop and overload
the vehicle body.
① Use the shift lever or change pedal to set the shift lever
to the neutral "N" position and stop the machine.
② Set the throttle lever to the "low speed" side to slow down
the engine.
③ After a few seconds in the low speed position, set the key
to the "OFF" position and stop the engine.
④ Depress the parking brake pedal, "lock" with the brake
stopper and park.
The machine should be flat and parked in a large area with no obstacles
around it, and the key should be removed to prevent theft.
To Next Page
Loading...
