2.各部の名称とはたらき
- 14 -
Be sure to insert the sub-chain lever operation to the notch position with the operation stopped.
Operation while driving or inadequate shifting operation may cause slipping due to gear
disengagement, which is extremely dangerous. Be sure to mow the grass only on the
"Mowing work " side. On the "moving " side, the speed is fast, and it is dangerous
because there is a delay in the danger avoidance measures in the case of an emergency.
（※Products with sub-change levers）
⑨Diff-Lock lever
Normally, use it in the "off" position. When working on gentle slopes or on soft ground, when
one side of the rear wheel slips and it is difficult to go straight, or when loading and unloading
on a truck, Set the diff-lock lever to the "on" position to both rear wheels will be directly
connected for the straightness will increase.
When used on flat ground, the turning radius will be large, which may cause tire wear and
mission damage.
⑩Parking brake pedal
When the Parking brake pedal is fully depressed, the brake is engaged, the Machine stops,
and the shift lever returns to the neutral "N" position. Get in the habit of using the change
pedal or shift lever to perform normal stop operations. If you lock it with the brake stopper
while depressing the pedal, it becomes a parking brake. If you step more deeper, the lock
will be released. The engine cannot be started unless the pedal is depressed (locked).
⑪Knife cover
When inspecting or replacing the knife, you can fix it
with the cover open.
To Next Page
Loading...
