203
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
4.3.16. Abnormal Printing
START
Is the recording paper loaded
in the Paper Tray properly?
1. Adjust the Paper Width Guide.
2. Adjust the Paper Length Guide.
Is Panasonic Toner being used?
Yes
No
Is the recording paper size, and
thickness within specification?
Yes
No
Yes
No
Replace with correct paper.
Replace with the Panasonic Toner.
Are all switches, and sensors
operating properly?
Do the rollers rotate properly?
Yes
No
Are there any foreign particles,
or paper pieces in the receiver
unit?
Yes
No
Remove the foreign particles, or paper pieces
from the receiver unit.
1. Check all rollers, gears, drive clutches, and
springs.
2. Adjust, or replace any defective parts.
Adjust, clean, or replace.
Yes
No
Is the receiving mechanism
operating correctly?
Yes
No
Adjust, or replace any defective parts.
END
To Next Page
Loading...
