Panasonic DP-8020E

309
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
< Paper Tray Operation >
a. When the printing operation begins, the Main Motor starts driving the Gears.
b. The Clutch is energized for a specified period of time and turns ON. This activates the Feed Roller.
The paper is separated into individual sheets by the Separation Roller and is transported.
c. The paper is transported to the Registration Roller, activating the Registration Sensor. After a
specified period of time, the Clutch is turned ON and the Registration Roller and the Registration
Pinch Roller start rotating. The paper is transported to the OPC drum area.
d. The paper passes through the Read Point Sensor and after a specified period of time, the Clutch is
turned OFF. The Registration Roller and the Registration Pinch Roller stop rotating.
Clutch
Registration Roller
Registration Actuator
Registration Sensor
Separation Roller
Pickup Roller
Feed Roller
Clutch