Local Firmware Update Tool (Parallel/USB Port)
Page 3
1. General
The Local Firmware Update Tool (Parallel/USB) allows a Panasonic Fax/Copy machine to emulate a Flash
Memory Card Writer and create a Master Firmware Card, or to program the Firmware Code Memory of the Unit
directly. Using a PC, the firmware code is transferred to the Flash Memory Card or the Firmware Code Memory of
the Unit through the Parallel/USB Port on the Panasonic Fax/Copy machine. The installation and operation are
very similar to the Printer Interface.
1.1 Supporting OS
This application software operation has been confirmed under the following OS
• Windows 98 / Me
• Windows NT 4.0 (Parallel Port only)
• Windows 2000 / XP
1.2 Supporting Panasonic Fax/Copier Models
Please refer to the service manual of each model.
To Next Page
Loading...
