Panasonic DP-8020E

63
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
2.2.4. Scanner Unit
(1) Remove the Control Panel Assembly.
(Refer to 2.2.3.)
(2) Remove 4 Shoulder Silver Screws (X2).
(3) Remove the Rear Document Plate (107).
(4) Remove the Platen (L) Glass (106).
(5) Holding by the center, slowly move the Lamp
Base Assembly to the center of the Scanner
Base Frame in the direction shown by the arrow.
(6) Release the Harness.
(7) Release the Latch Hook.
(8) Disconnect 2 Harnesses on the Inverter PC
Board (CN1, and CN2).
(9) Remove the Inverter PC Board (416).