Panasonic DP-8020E

Local Firmware Update Tool (Parallel /USB Port)
Page 4
2. Installation
2.1 Installing the Hardware on the Panasonic Fax/Copy Machine
1
Depending on the model, a Parallel Port or USB Port is installed.
Please install the Parallel Port/USB Port Assembly into one of the supporting Panasonic
Fax/Copier models by following the appropriate option installation instructions for that model.
2
Prepare the Parallel cable or USB cable for connecting the Panasonic Fax/Copy machine and
your PC.
Important: For the USB port models, do not connect the USB cable yet.
2.2 Installing the Local Firmware Update Tool
1
Start Microsoft Windows.
For Windows NT4.0 / 2000 / XP, log onto the computer/network with an account that can add or
change printer configurations (i.e. Administrator).
Important: For the USB port models, do not connect the USB cable yet.
2
Run \xFirmware\Tools\Firmup\Setup\Setup.exe from the install disk.
3
Installation Destination Folder
Click [Next] button.
4
Program Folder
Click [Next] button.