Panasonic DP-8020E

324
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(20) Route the Harness under the Harness Shield as
illustrated.
Note:
To prevent damage to the Harness, ensure it is
under the Harness Shield.
<Installing the Process Unit>
(21) Open the Front Cover.
(22) Remove 1 Screw.
(23) Remove the Connector Cover.
(24) Carefully remove the Protective Sheet, and
Tapes from the OPC Drum Assembly.
Note:
Do not tilt the Process Unit, or the Developer will
spill.