343
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(26) Install 2 Clamps.
(27) Install the PCB Spacer.
(28) Plug the FXB PC Board into the SC PC Board
with on Board Connector (CN80).
(29) Secure the FXB PC Board with 2 Screws
(M3 x 6).
(30) Secure the MJR Harness with the Harness
Clamps.
(31) Connect the MJR Harnesses to the FXB PC
Board (CN391, CN392 and CN393).
(32) Attach the Function Label (specified
destination) on the upper right corner as
illustrated.
Note: (For ADF or Platen)
Attach the Function Label as the same position as
i-ADF.
To Next Page
Loading...
