Panasonic DP-8020E

352
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(21) Set the parameter for the Keyboard Sheet by following the steps below.
Note:
The parameter can be set whether SCANNER or FAX Mode depends on which Option is installed.
<SCANNER MODE>
a. Press"SCAN/FILE".
b. Press the "FUNCTION", "1" and "SET" keys to enter the SET Mode.
c. Press "2" and "SET" keys.
d. Press "6" key.
e. Press "1", "2" or "3" key to select desired Alphabet arrangement and press "SET" key.
"1" : QWERTY (English)
"2" : QWERTZ (German)
"3" : AZERTY (French)
f. Press "STOP" key.
<FAX MODE>
a. Press "FAX/EMAIL".
b. Press the "FUNCTION" and "7" keys to enter the SET Mode.
c. Press "4" and "SET" keys.
d. Press "64" and "SET" keys.
e. Press "1", "2" or "3" key to select desired Alphabet arrangement and press "SET" key.
"1" : QWERTY (English)
"2" : QWERTZ (German)
"3" : AZERTY (French)
f. Press "STOP" key.
(17) Connect the Keyboard Harness to CN234 and
Panel Harness to CN220 on the PNL1 PC
Board.
(18) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(19) Plug the AC Power Cord and turn the Power
Switch on the Right Side of the machine to the
ON position.
(20) Reconnect the Telephone Line Cable if it was
disconnected.