Network Firmware Update Tool (LAN)
Page 9
6.
Specify the Firmware Code File using the
following methods.
Select an Archive File (Complete Set)
--> Step 6a1
With this choice you can directly select the
Firmware Code Archive File.
The selected archive file will be extracted
into the local \Data folder automatically,
and it is chosen as a set when the update
of multiple firmware code files are
necessary.
Select a Parent File Folder (Complete Set)
--> Step 6b1
If the archive file is already extracted into
the local \Data folder, you can select the
Parent File Folder directly from here.
It is chosen as a set when the update of
multiple firmware code files are necessary.
Select Independent File Folders
--> Step 6c1
If the archive file is already extracted into
the local \Data folder, you can select
independent file folders from here.
Note: Files are chosen automatically in the automatic mode, so the screen of step 6 is not shown.
6a1 Select an Archive File (Complete Set)
Select "Select an Archive File (Complete
Set)" and click [Browse...] button.
To Next Page
Loading...
