The following types of flexible keys are available:
Button Description Lamp Indication
One Touch
Dial
Used to dial a previously set phone number with
one touch.
–
BLF (Busy
Lamp Field)
Used to show the current status of another
extension, call the extension and transfer calls to
it.
Note
• It may be necessary to specify the
Resource List URI to use this feature,
depending
on your phone system (® see
[Resource List URI] in 4.6.2.1 Call
Features in the Web user interface or
"RESOURCELIST_URI_n" in 5.3.34 Call
Control Settings in the configuration
file).
• Specify the number assigned to a BLF for
performing call pickup (® see [Directed
Call Pickup] in 4.6.1.1 Call Control in
the Web user interface or
"NUM_PLAN_PICKUP_DIRECT" in
5.3.30 Telephone Settings in the
configuration file).
Off: The BLF extension is idle.
Red on:
A corresponding BLF extension
is using the line.
Flashing red rapidly: The BLF
extension is receiving an incoming call.
Line Used to seize a line in order to make or receive
a call. The LED of the function key indicates the
status of the line.
Off: The line is idle.
Blue on: The line is on a call.
Flashing blue slowly: A call is on hold.
Flashing blue rapidly: A call (including
Hold Recall) is being received to the line
(or a shared line).
Red on: A shared line is in use or a call
is on private hold at another unit.
Flashing
red slowly: A shared line is on
hold at another unit.
ACD
*1
Used to log in or log out of a group when ACD
(Automatic Call Distribution) is enabled.
Note
• It is necessary to set the ACD feature to
enable (® see [Enable ACD] in
4.3.10
ACD Settings [Line1]–[Line6] in
the Web user interface or
"ACD_ENABLE_n" in 5.3.14 Call Center
Settings in the configuration file).
Off: Logged in
Red on: Logged out
Document Version 2015-07 Administrator Guide 323
6.3 Flexible Keys
To Next Page
Loading...
