Panasonic KX-TDA100

1.23 Administrative Information Features
Feature Guide 179
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
(9) CD (Condition
Code)
Shows other call information using the following codes:
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA) or TIE line
service
RM: Remote maintenance (modem) (→ 2.3.1 PC
Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
(10) Cost Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
Item Description
Outgoing CO line call Controls whether outgoing CO line calls are shown. This setting is
common throughout the PBX (→ SMDR Outgoing Call Printing [804]).
Class of Service (COS) programming is also required.
Incoming CO line call Controls whether incoming CO line calls are shown (→ SMDR Incoming
Call Printing [805]).
Outgoing intercom call Controls whether outgoing intercom calls are logged.
Log-in/Log-out status Controls whether the Log-in/Log-out status of extensions is logged.
ARS dial Controls whether the user-dialed number or the ARS-modified number
is shown.
A Host PBX Access code ("=" followed by the access code) can be
shown (as supplementary information) only when the modified number
is selected in this setting. (→ 1.9.1 Automatic Route Selection (ARS))
Caller's identification Controls whether a caller's telephone number, name, number and name,
or nothing is shown. If "none" is selected, <I> will not be shown.
DID number Controls whether DID numbers, names, numbers and names, or nothing
is shown. If "none" is selected, <D> will not be shown.
Secret dialing Controls the display of secret dialing, when ARS dial, above, is set to
show ARS-modified numbers. If enabled, numbers dialed secretly will be
shown as dots.
If ARS dial is set to show user-dialed numbers, secretly dialed numbers
are always shown as dots in SMDR, regardless of this setting.
Date order Controls the date format. (MM-DD-YY, DD-MM-YY, YY-MM-DD, or YY-
DD-MM)
Received call Controls whether the time of receiving an incoming CO line call is shown.
Number in the
Pattern
Data Description