Panasonic KX-TDA100

1.1 Incoming Call Features
Feature Guide 19
Calling Line Identification (CLI) distribution is the most customizable call distribution method available.
It allows calls from specific people to be directed to specific destinations, based on the callers'
telephone numbers. CLI distribution, when enabled for the current time mode, takes precedence over
DIL or DID distribution.
3. Available Distribution Method for Public CO Lines
4. Available Destination
The following destination types can be programmed as DIL, DID, or CLI destinations.
Feature Description Details in
Calling Line Identification
(CLI) Distribution
Directs a call to its preprogrammed destination if the
caller's telephone number and its CLI destination
has been stored in the System Speed Dialing Table.
• 1.1.1.4 Calling
Line Identification
(CLI) Distribution
Destination Type Availability
Wired Extension (PT/SLT/T1-OPX)
PS
ICD Group
PS Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
CO Line Group Access no. + CO Line Group no. + Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
T1
LCOT
GCOT
DID
TIE (E&M)
CO
LCOT
Default
Available
PRI
Port (Channel)
Type
Distribution Method
DIDDIL
CO Line
Card