1.27 Networking Features
Feature Guide 205
d) TIE Line Call Routed to CO Line via FWD/Intercept Routing/Call Transfer
A TIE line call can be redirected to an outside party via FWD, Intercept Routing, or Call
Transfer.
[Example]
Explanation:
PBX-1 makes a call.
Extension 1001 of PBX-1 dials the TIE Line Access number "7", the PBX code "902", and an
extension number "1001".
1. The TIE Line Access number was dialed, therefore PBX-1 checks its TIE Line Routing
and Modification Table (not shown here). Finds leading number "902". 1st priority CO line
group is "1". No modification is programmed.
2. PBX-1 removes the TIE Line Access number and sends the remaining digits down the
TIE line via CO line group 1. The number is now "902-1001".
PBX-2 receives the call.
1. PBX-2 checks its Incoming Number Modification Table (not shown here). No modification
is programmed. The number is still "902-1001".
2. PBX-2 removes its own PBX code "902" and sends the call to extension 1001.
3. Calls directed to extension 1001 are redirected to the outside party (1-212-555-1234)
because of one of the following:
a) This number is programmed (not shown here) as the FWD or Intercept Routing
destination for calls to extension 1001. The destination is programmed as "9-
12125551234".
b) The extension 1001 user transferred the call to the outside party by dialing "9-
12125551234".
Outside Party
1-212-555-1234
CO Line
Private Network
Extn. 1001 Extn. 1001
Telephone
Company
Dials "7-902-1001"
PBX Codes
PBX-1: 901
PBX-2: 902
PBX-2PBX-1
To Next Page
Loading...
