Panasonic KX-TDA100 - Page 364

4.7 Configuration [1]
364 Feature Guide
ISDN CO / QSIG Master / QSIG Slave—T319
Specifies the maximum time the PBX waits for a reply after sending the Suspend message.
Default
0 × 100 ms
Value Range
0–600 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T322
Specifies the maximum time the PBX waits for a reply after sending the Status enquiry message.
Default
40 × 100 ms
Value Range
0–600 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T3D3
Specifies the length of time that the PBX tries to establish L2 in "Permanent" mode.
Default
100 × 100 ms
Value Range
0–3000 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None