Panasonic KX-TDA100 - Page 365

4.7 Configuration [1]
Feature Guide 365
ISDN CO / QSIG Master / QSIG Slave—T3D9
Specifies the length of time that the PBX tries to disconnect L2 in "Call by Call" mode.
Default
200 × 100 ms
Value Range
0–3000 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN Extension—T200
Specifies the maximum time the PBX waits for a reply after sending the L2 command to ISDN.
Default
10 × 100 ms
Value Range
0–600 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN Extension—T201
Specifies the maximum time the PBX waits for a reply after resending the TEI check request to ISDN.
Default
10 × 100 ms
Value Range
0–600 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None