Panasonic KX-TDA100 - Page 597

4.10 Extension [4]
Feature Guide 597
Executive Override Deny
Enables the prevention of calls being interrupted by other extensions.
Default
Disable
Value Range
Disable: Allows other extension users to interrupt an existing call
Enable: Denies other extension users to interrupt an existing call
Programming Guide References
None
Feature Guide References
1.7.2 Executive Busy Override
CLIP on Extension / CO
Selects the CLIP number to show on the called party's telephone.
Default
Extension
Value Range
Extension: Show the CLIP number specified in CLIP ID on Option 1 tab
CO: Show the CLIP number specified in Subscriber Number in PRI Port [1-6].
Programming Guide References
4.7.19 PRI Port [1-6]—CO Setting—Subscriber Number
4.10.1 Wired Extension—Extension Settings [4-1-1]—Option 1—CLIP ID
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)
CLIR
Enables the restriction to show the CLIP number for public network on the called party's telephone when
making a CO line call.
Default
Disable
Value Range
Disable, Enable
Programming Guide References
None