Panasonic KX-TDA100 - Page 753

4.17 Maintenance [11]
Feature Guide 753
Programming Guide References
None
Feature Guide References
1.23.1 Station Message Detail Recording (SMDR)
RS-232C: Stop Bit
Selects a stop bit code that indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the printer or personal computer.
Default
1 bit
Value Range
1 bit, 2 bit
Programming Guide References
None
Feature Guide References
1.23.1 Station Message Detail Recording (SMDR)
RS-232C: Flow Control
Enables the hardware flow control.
Default
None
Value Range
None, Hardware
Feature Guide References
None
Error Log Information Print
Specifies whether the PBX error log is printed to the SMDR output.
Default
Print
Value Range
No Print, Print
Programming Guide References
None