Parker PSD1-SW1200 - Motors; Feedback; Motor Holding Brake

Technical data
100 (109) 192-011006N8 2019-07 09.10.19 09:27
8.2.10. Size / Weight PSD1-M
Category
Specifications
Controller type
Weight
[kg]
Dimensions
Height x Width x Depth (mm]
PSD1-M_1300
4
360 x 50 x 270
PSD1-M_1500
PSD1-M_1600
PSD1-M_P010
PSD1-M_2220
4
PSD1-M_2330
PSD1-M_2440
PSD1-M_2630
PSD1-M_3222
4.2
PSD1-M_3433
PSD1-M_1800
6.8
360 x 100 x 270
PSD1-M_P020
6,3
Mounting (see page 41, see page 43, see page 28)
8.3 Motors/ feedback/ motor holding brake
In this chapter you can read about:
• Motor technologies supported ................................................................................................. 100
• Feedback system HIPERFACE DSL® .................................................................................. 101
• Resolver ................................................................................................................................. 101
• Incremental encoder / analogue HAL sensor .......................................................................... 101
• Motor holding brake output ..................................................................................................... 102
8.3.1. Motor technologies supported
Category
Specifications
Motors
Direct drives
• Linear motors
• Torque motors
• Sinusoidally commutated synchronous motors
♦ Maximum rotating field frequency: 590 Hz
max. Velocity: 60*590/number of pole pairs in [min
-1
].
♦ Maximum number of poles = 1200
• Temperature sensor supported:
♦ KTY84-130(insulated in accordance with EN60664-1 or IEC60664-1)
♦ PTC / NTC switches
♦ KTY83-110
♦ PT1000
• 3 phase synchronous direct drives