Parker PSD1-SW1200 - Motor Holding Brake Output; Digital Inputs; Outputs (Specifications)

Technical data
102 (109) 192-011006N8 2019-07 09.10.19 09:27
8.3.5. Motor holding brake output
Category
Specifications
Voltage operating range
21 ... 27 VDC
Maximum output
current (short circuit
proof)
PSD1-S: 1.0 A
PSD1-M: 1.6 A
8.4 Digital inputs / outputs (specifications)
Category
Specifications
Digital inputs
• 4 Digital inputs
• Input resistor 22 kΩ
All inputs and outputs do have 24 V level.
Input level:
"0" (low) = Rated Input Voltage ≤ 12.5 V
"1" (high= Rated Input Voltage ≥ 13.5 V
Digital outputs
• 2 Digital outputs (4 on mains module)
• Load max. 100 mA