Parker PSD1-SW1200 - Mounting and Dimensions PSD1-M Size 2

192-011006N8 PSD1 Installation Guide
192-011006N8 2019-07 09.10.19 09:27 43 (109)
5.2.1.1 Mounting distances PSD1-M size 1
1 Additional mounting distance corresponding to the minimum bending radius of the cables
2 At least 100mm distance for free circulation of cooling air.
5.2.2. Mounting and dimensions PSD1-M size 2
Information on
PSD1-M Size 2
Multi axis Servo Drives (30 A) and
Mains Module PSD1-M_P020
Required mounting distance for heat regulation at the top and below: At least
100mm
Mounting:
4 socket head screws M5