Parker PSD1-SW1200 - PROFINET Characteristics; Ethernet IP Characteristics

192-011006N8 PSD1 Installation Guide
192-011006N8 2019-07 09.10.19 09:27 105 (109)
8.12 PROFINET Characteristics
Category
Specifications
Profile
• PROFIdrive profile drive technology V4.2
PROFINET Version
• PROFINET IO (RT)
Transmission mode
• 100BASE-TX (Full Duplex)
Profinet ID
• PSD1-S: 0x5331
PSD1-M: 0x4D78
Device master file
• PSD1-S http://www.Parker.com/Literature/Electromechanical
Europe/Downloads/GSDML-V2.3-Parker-PSD1S.zip
• PSD1-M
http://www.Parker.com/Literature/Electromechanical
Europe/Downloads/GSDML-V2.3-Parker-PSD1M.zip
Realized application
class
• AC 3 Positioning
8.13 Ethernet IP characteristics
Category
Specifications
Profile
DS402
Ethernet/IP
• Generic device support for CIP and encapsulated layer
Ethernet
• Several Ehernet interfaces are supported e.g., for devices with embedded
switch technology (for the support of linear or ring topology)
Connection established
• Device Level ring (DLR) functionality is supported (announce based ring nod)
Connections
•
Simultaneous support for up to 10 I/O connections
• Simultaneous support for up to 10 encapsulation sessions
• Simultaneous support for up to 2 explicit messaging connections per
encapsulation session
• Unconnected explicit messaging is supported
Service(s)
• Quality of Service (QoS) supported
• UDP for order list services, list targets and list identity for encapsulation protocol
available
• Pv4 address conflict detection for EtherNet/IP devices
Device master file
• PSD1 http://solutions.parker.com/psd_support
Product Code
• PSD1S: 21297 (0x5331)
• PSD1M_1: 19761 (0x4D31) (1 power stage)
• PSD1M_2: 19762 (0x4D32) (2 power stages)
• PSD1M_3: 19763 (0x4D33) (3 power stages)
Vendor code
• 4
Realized object grades
• Identity
• Message Router
• Assembly
• Connection manager
• Device level ring
• QoS
• PSD1 object pool
• TCP/IP Interface
• Ethernet Link