Parker PSD1-SW1200 - Page 48

Installation of the multi-axis system PSD1-M
48 (109) 192-011006N8 2019-07 09.10.19 09:27
Status
No.
Status of axis
Left LED a
(green) (ready)
Right LED b
(red) (error)
6
Axis in error state / error
present / axis energized (error
reaction 1)
on flashes quickly (5 HZ)
7
Axis in error state / error
present / axis de-energized
(error reaction 2)
off on
8
Axis faulty: Please contact us
on
on
9
STO active
off
flashes slowly (1 HZ)
10
reserved
flashes quickly
flashes quickly (5 HZ)
11
SD Card detected or
restoring from SD card
successfully terminated
alternate quick flashing
(LEDa green, LEDb green)
12
SD card not detected or
restoring from SD card
interrupted
alternate quick flashing
(LEDa red, LEDb red)
13
Axis de-energized
off
Single flash
14
Axis energized
on
Single flash
15
Axis de-energized
HEDA3 slave not ready
off Double flash
16
Axis energized
HEDA3 Slave not ready
on Double flash
17
Axis de-energized
HEDA3 Master not ready
off Triple flash
18
Axis energized
HEDA3 Master not ready
on Triple flash
19
Axis de-energized
off
Jitter (10 HZ)
20
Axis energized
on
Jitter (10 HZ)
Error response 1: Ramping with slow ramp; then deactivate control loops.
Error response 2: Ramping with "Stop" ramp, then deactivate control loops.
For the meaning of individuals errors please go to Error list.
Single flash
Double flash
Triple flash
Caution - Risk of electric shock!
High voltage supply may be present even with missing voltage supply (both
LEDs off)!