44
Right-click menu (click on thumbnails):
Allows to rebuild all thumbnails and to search for
events.
Furthermore the Set In / Out gives you the possibility
to set values for a sequence, which can be played via
play button. Reset In / Out discards these settings.
Set In / Out is active: if you save/export your
images, only the selected images are saved/exported
(see 6.9.2).
The light gray area in the upper scale shows an In-
Out example area. It is very easy to define a new
area: just right-click on the start and end frame in
one of the scales. The In image must be left to the red bar, the Out
image to the right of the red bar.
In / Out area can be adjusted by holding down the left mouse button
and sliding the boarders to increase / decrease.
Search Events in Thumbnails: detected events are
displayed as green bars.
Too dark or bright thumbnails: if
thumbnails are too dark or too
bright, right-click in view window
(see 6.9.8) and select Auto Range
Peak or Auto Range Crop. Then
right-click on a thumbnail image and select Rebuild Thumbnails.
Now the thumbnail images should comply with the view window.
Use your keyboard to scroll through the Images:
Page up / down keys: 10 Images up or down
Arrow keys: quick scrolling through the images.
Advantage: fluent video playback in the View window (forwards or
backwards).
Home/Pos1 key: first image.
End key: last image.
To Next Page
Loading...
Need help?
General
