70
A3.4 DIMENSIONS
All dimensions are given in millimeter.
Weight: 4kg (completely filled cooling liquid tank)
A3.5 YOUR OWN COOLING SYSTEM
You are not restricted to purchase the pco.aquamatic system - it is
possible to use an own water cooling solution. A separate power
supply will be provided to every pco.edge camera with water
connectors. The hardware of the pco.edge cameras with USB 3.0
Interface is designed to work with or without a water cooling system,
because a fan that provides adequate cooling is inside the camera
anyway.
In case you use an own water cooling system, please make sure that
the liquid you use to cool your camera is at all times never below the
dew point of the ambient temperature. In order to avoid any
appearance of condensation, use a cooling liquid at room
temperature.
• A liquid flow rate of 1–2 litres per minute is sufficient
• Always use Innovatec Protect IP cooling fluid or an equivalent
cooling fluid
To Next Page
Loading...
Need help?
General
