Pco Edge 3.1 User Manual

9
4 INSTALLATION
4. INSTALLATION
You will find all necessary files on the accompanying USB storage
device. You may also download the latest versions of our software,
camera driver and third party software drivers from the PCO website.
Minimum system requirements:
•
Intel® Core™ i7
•
Full-HD resolution display
• RAM > 8 GB DDR3
• PCI Express x4 Gen 2 (CLHS)
• PCI Express x4 Gen 1 (CL)
• Windows 7 or higher
Please contact PCO for an appropriate system configuration.
4.1 DRIVER
There are three different kinds of interfaces available:
Camera Link (Frame Grabber card)
When operating the camera with Camera Link Interface: Please run
the appropriate grabber driver installation with default settings.
For detailed installation instructions please see A4.2.
Camera Link HS (Frame Grabber card)
When operating the camera with Camera Link HS interface: Please
run the appropriate grabber driver installation with default settings.
For detailed installation instructions please see A4.3.
USB 3.0
When USB 3.0 is used as a camera interface, it is recommended to
use the enclosed PCIe Interface card. For detailed installation
instructions or further hardware recommendations, see A4.3.
Graphic card NVIDIA Cuda Driver:
Please update your NVIDIA driver for Camware 4. In case of an old
driver version GPU Processing is not working. Therefore image
processing is slow.
Please check if GPU Processing is activated by
having a look into the Proc config settings in
the Convert Control window (see Convert
Control chapter 6.3.10).
If GPU Processing is disabled and shown
grayed, please update your NVIDIA driver or
check the website of the computer manufacturer
for graphic card driver updates. Your NVIDIA
driver version must be at least 333.11 or higher.
1
2
1
2

Pco Edge 3.1 Specifications

General

Brand	Pco
Model	Edge 3.1
Category	Digital Camera
Language	English