Pco Edge 3.1 User Manual

67
A3 WATER COOLING OPTION PCO.AQUAMATIC II
A3 WATER COOLING OPTION PCO.AQUAMATIC II
This is the re-cooling system for pco.edge cameras with water-
cooling.
A3.1 SYSTEM COMPONENTS
Description
pco.aquamatic II
Connection Tube 5m PVC 3541-01 PCO (with Colder
NS212 fittings)
Power supply 1.2m
Power cable
EDGE WAT camera cable 5m FGG-RG58- NC3MX
Innovatec Protect IP 1L
The operation of the pco.aquamatic is simple and uncomplicated.
Normally no maintenance and nearly no attention are needed. Only
the liquid level of the reservoir (water tank) should be controlled from
time to time.
Only use Innovatec Protect IP for the pco.aquamatic! Do not use
or add any other cooling liquid or normal water! If you need to add
cooling liquid in order to maintain level in the tank, please contact
PCO for additional supply.
The cooling liquid will turn yellow after some hours of operation. This
is normal and no sign of wear or malfunction. The optimum pH-value
is between 8 and 9 (please check this value if you are concerned
about the cooling liquid quality).
NOTE
The recommended service interval for the change of the cooling
liquid is four years.
1
2
6
4
3
5
1
2
3
4
5
6

Pco Edge 3.1 Specifications

General

Brand	Pco
Model	Edge 3.1
Category	Digital Camera
Language	English