50
Export Recorder Sequence (not reloadable!)
Use this command to export a sequence of
images. If more than one camera is connected and
an image window is currently open, the record of
the window which has got the input focus will be
saved. If no image window is open the Export
Recorder Sequence menu does not appear. This
command will open the Export recorder box. Files
with the extensions fts, tif, bmp, asc, avi, mpg, jpg,
jp2, and wmv can be exported (see Appendix A7).
Auto File Save see 6.8.1
Options
Single File Properties
Single tif file 16 bit alignment: upper / lower
ASCII File Separator: select a separator for
the values in the ASCII file. Select: tab, space,
semicolon, colon, comma, hyphen, slash,
backslash.
Binary pgm file: set the format of the pgm
(portable gray map) file. Select: yes, no.
Jpeg2000 image quality: set compression
from 20 to 100%.
Jpeg image quality: set compression from 20
to 100%.
Binary ppm file: set format of the ppm
(portable pixmap) file. Select: yes, no
RAW 16bit RGB tif file: save raw tif without
color balance. Select: yes, no.
Use cache file: Caches image data on disc for
a camera with camera internal memory. Select:
yes, no
General File Properties
FIFO buffer size: set the FIFO buffer size in number of images. This
helps to avoid gaps during file write delays. Usually this is set to 150.
Preserve last record: preserve current recorded images. When set,
the user will be asked whether to really start a new record or to close.
View Properties:
Crosshair color: set the color for crosshair, save ROI and line tool
Crosshair length: set the crosshair length in pixel
Activate crosshair: see chapter 6.9.8
To Next Page
Loading...
Need help?
General
