R26
Set-up Menu
R
You can select a method for assigning the folder names for
storing images.
Memo
• When the number of captured images exceeds 500, images are
divided into folders of 500 images each. However, in Auto
Bracketing shooting, images will be stored in the same folder until
shooting is completed, even if the number of images exceeds 500.
File names are assigned as follows, according to the color
space setting. You can change the names of files. (The default
setting is [IMGPxxxx.JPG] and [_IGPxxxx.JPG], where “xxxx” is
the file number.)
1 Select [File Name] in the [R2] menu and press the
5 key.
The [File Name] screen appears.
2 Select [Change], press the
5 key, and enter the text.
To reset a changed file name to its
default setting, select [Reset File
Name].
Available operations
3 After entering the text, move the text selection
cursor to [Finish] and press the 4 button.
The file name is changed.
Folder Name R2
Date
(default
setting)
The two digits of the [month] and [day] on which the picture
was taken are assigned as the folder name in the form of
[xxx_MMDD].
• [xxx] is a sequential number from 100 to 999.
• [MMDD] (month and day) is displayed according to the date
format set in [Date Adjustment] (p.R23) in the [R1] menu.
Example: [101_0125] indicates a folder with pictures taken
on January 25th.
PENTX
The folder name is assigned in the form of [xxxPENTX].
Example: 101PENTX
File Name R2
Color Space File Name
sRGB IMGPxxxx.JPG
AdobeRGB _IGPxxxx.JPG
S dial Moves the text input cursor.
2345 keys Moves the text selection cursor.
4 button Enters the character.
File Name
Change
Reset File Name
Adobe
RGB
s
RGB
I M G P xxxx.jpg
_ I G P xxxx.jpg
MENU
File Name
Finish
Cancel Enter
OK
MENU
Text input cursor
Text selection cursor
e_kb487.book Page 26 Wednesday, December 8, 2010 9:49 AM
To Next Page
Loading...
Need help?
General
