Pentax 645D - Setting the Color Temperature; Saving the White Balance Setting of a Captured Image

52
Shooting Functions
3
You can save up to three color temperature settings. (The
default setting is [5000K].)
1 Select K in the [White Balance] screen and press
the 5 key.
2 Use the 23 keys to select K1, K2 or K3 and press
the 5 key.
The [Color Temperature] screen appears.
3 Use the R/S dials to
adjust the color
temperature.
Color temperature steps differ
depending on the e-dial.
4 Press the 4 button.
The settings are saved and the camera returns to the [White
Balance] screen.
Memo
• By default, the unit of Color Temperature is [Kelvin]. You can
change the unit to [Mired] in [22. Color Temperature Steps] in the
[A4] menu. (Figures are converted to Kelvin and displayed.)
(z p.R33)
You can copy the white balance setting of an image captured
with this camera and save it as Manual White Balance.
1 In Playback mode, display the image with the
white balance setting you want to copy.
2 Select K (Save as Manual WB) in the playback
mode palette.
The save confirmation screen appears.
3 Select K1, K2 or K3, and
press the 4 button.
The white balance setting of the
selected image is saved to Manual
White Balance and the camera
switches to Capture mode.
Caution
• The fine-tuned white balance value used when shooting is reset.
Memo
• Refer to “Setting the Playback Functions” (p.66) for operations of
the playback mode palette.
Setting the Color Temperature
e-dial Kelvin Mired
R 1 Step (100K) 1 Step (20M)
S 10 Steps (1,000K) 5 Steps (100M)
Cancel Check
Color
Temperature
K1
5000K
OK
OK
MENU
GG
BBA
A
A
MM
±0 ±0
±0
Saving the White Balance Setting of
a Captured Image
Cancel
100-0105
100-0105
Manual White Balance is
now set according to the
current image's color balance
Manual White Balance is
now set according to the
current image's color balance
OK
OK
1
e_kb487.book Page 52 Wednesday, December 8, 2010 9:49 AM