Pentax 645D User Manual

61
Shooting Functions
3
Preview
There are two preview methods: Optical Preview (default
setting) using the viewfinder and Digital Preview using the
monitor.
1 Turn the main switch to |
while viewing the subject
through the viewfinder.
You can preview the depth of field in
the viewfinder while the main switch is
set to |.
During this time, no shooting
information is displayed in the viewfinder, and the shutter cannot
be released.
2 Take your finger off the main switch.
Optical Preview ends and the camera is ready to take a picture.
1 Set [Digital Preview] in the [A3] menu.
Refer to “Menu Reference”. (z p.R18)
2 Turn the main switch to | while viewing the
subject on the monitor.
A preview appears on the monitor.
Available operations
3 Press the shutter release button halfway.
Digital Preview ends and the autofocus system operates.
Memo
• The maximum display time for Digital Preview is 60 seconds.
Optical Preview
Digital Preview
S dial Enlarge Instant Review (p.67)
L button Saves the preview image as a new file.
e_kb487.book Page 61 Wednesday, December 8, 2010 9:49 AM

Pentax 645D Specifications

General

Sensor Type	CCD
Sensor Size	44 x 33 mm
Effective Pixels	40 megapixels
Autofocus Points	11
Image Processor	PRIME II
Continuous Shooting Speed	1.1 fps
Screen Size	3.0 inches
Screen Resolution	921, 000 dots
Viewfinder Type	Pentaprism
Viewfinder Coverage	98%
Storage Media	Dual SD/SDHC card slots
Dimensions	156 x 117 x 119 mm
Camera Type	Digital SLR
Shutter Speed	1/4000 to 30 sec
Battery Type	Rechargeable Lithium-Ion Battery
Weight	1480 g