R31
Custom Setting Menu
A
Sets the order for Auto Bracketing shooting.
Compensates automatically when the proper exposure cannot
be obtained. (The default setting is [Off].)
Select F (default setting), [Unchanged] or [Flash] for the
white balance when the flash discharges.
Fine-tunes the white balance when the light source is specified.
Adjusts the tungsten light color tone when [White Balance] is set
to F.
Sets the camera so that autofocus is performed when the =
button is pressed.
8. Auto Bracketing Order A2
Setting Frames Order
1
0 – +
(default setting)
2 frames
3 frames
5 frames
0 → –1/0 → +1
0 → –1 → +1
0 → –1 → +1 → –2 → +2
2 – 0 +
2 frames
3 frames
5 frames
–1 → 0/0 → +1
–1 → 0 → +1
–2 → –1 → 0 → +1 → +2
3 + 0 –
2 frames
3 frames
5 frames
0 → –1/+1 → 0
+1 → 0 → –1
+2 → +1 → 0 → –1 → –2
4 0 + –
2 frames
3 frames
5 frames
–1 → 0/+1 → 0
0 → +1 → –1
0 → +1 → –1 → +2 → –2
9. Auto EV Compensation A2
10. WB When Using Flash A2
11. WB Adjustable Range A2
1
Fixed
(default setting)
Color temperature of the light source is fixed.
2 Auto Adjustment Automatically performs fine-tuning.
12. AWB in Tungsten Light A2
1
Subtle Correction
(default setting)
Keeps the tungsten light color tone.
2 Strong Correction
Applies a stronger correction of the tungsten
light.
13. AF Button Function A2
1
Enable AF
(default setting)
Autofocus is performed by using the =
button or the shutter release button.
2 Cancel AF
Pressing the shutter release button disables
autofocus while the = button is pressed.
(Take your finger off the = button to return to
normal autofocus mode.)
e_kb487.book Page 31 Wednesday, December 8, 2010 9:49 AM
To Next Page
Loading...
Need help?
General
