51
Shooting Functions
3
3 To fine-tune the white
balance, press the 5 key.
Seven levels (225 patterns) are
available on the G-M and B-A axes.
Available operations
4 Press the 4 button.
The camera switches to Capture mode.
Memo
• The white balance of a JPEG image can also be adjusted after
shooting. Immediately after shooting, press the n button and
change the setting, and then press the L button and select
[Save as].
• The camera automatically performs fine-tuning even when the light
source is specified. To fix the color temperature of the light source,
use [11. WB Adjustable Range] in the [A2] menu. (z p.R31)
• To set the white balance setting when using the flash, use [10. WB
When Using Flash] in the [A2] menu. (z p.R31)
You can save up to three manual white balance settings.
1 Select K in the [White Balance] screen and press
the 5 key.
2 Use the 23 keys to select
K1, K2 or K3 and press
the 5 key.
3 Aim the camera at the subject to measure the
white balance and press the shutter release
button fully.
4 Use the S dial to select
the entire screen or spot
area for the measuring
range.
When a spot area is selected, use the
2345 keys to move the frame to
the position you want to measure.
5 Press the 4 button.
When measuring is completed, the camera returns to the white
balance fine-tuning screen.
23 keys Adjusts the tone of the colors between green
(G) and magenta (M).
45 keys Adjusts the tone of the colors between blue
(B) and amber (A).
| button Resets the adjustment value.
Cancel Check
Shade
OK
OK
MENU
GG
BBA
To Next Page
Loading...
