Pentax 645D - Attaching the Strap; Attaching the Lens

24
Getting Started
2
Attaching the Strap
1 Pass the end of the strap
through the triangular ring.
2 Secure the end of the strap
on the inside of the clasp.
Attaching the Lens
1 Make sure that the camera is turned off.
2 Remove the body mount cap
(1) and lens mount cap (2).
Hold down the lens unlock button (3)
and remove the body mount cap.
3 Align the Lens mount index
(red dots; 4) on the camera
and the lens, and turn the
lens clockwise.
Do not press the lens unlock button at
this time.
4 Remove the front lens cap
by pushing the indicated
portions.
e_kb487.book Page 24 Wednesday, December 8, 2010 9:49 AM