Pentax 645D - Saving Rotation Info; Auto Image Rotation; AF Fine Adjustment; External Flash Discharge

R35
Custom Setting Menu
A
Adds image rotation information when shooting. (The default
setting is [On].)
Automatically rotates the image based on the rotation
information during playback. (The default setting is [On].)
Adjusts the AF focus position. (The
default setting is [Off].)
To make adjustments, select [On] and
then select [Apply All] or [Apply One].
Available operations
Memo
• Even when an adjustment value has been saved using [Apply
One], if [Apply All] is selected, the [Apply One] setting is disabled.
• To reset a saved adjustment value, select [Reset].
Sets the function of the I button when an external flash is
connected. Select [Off] (default setting), [Modeling Flash] or
[Test Flash].
Sets the number of recorded pixels when [JPEG Recorded
Pixels] is set to M or S.
Returns settings in [A1-5] menu to default settings.
Memo
• The adjustment value of [33. AF Fine Adjustment] is not reset.
31. Saving Rotation Info A5
32. Auto Image Rotation A5
33. AF Fine Adjustment A5
Apply All Applies the same adjustment value to all lenses.
Apply One
Appears only when the lens ID is obtained. Saves and
applies an adjustment value for each lens type. (Up to 20
lens types)
5 key or S dial
to the right (y)
Adjusts the focus to a closer position.
4 key or S dial
to the left (f)
Adjusts the focus to a farther position.
| button Resets the adjustment value.
33. AF Fine Adjustment
Apply All
Apply One Unset
Reset
Cancel OK
OK
MENU
±0
+10
34. External Flash Discharge A5
35. M and S Pixel Resolution A5
1 (default setting) M: k (6528×4896) S: q (4224×3168)
2M: k (6528×4896) S: a (3072×2304)
3M: n (5376×4032) S: q (4224×3168)
4M: n (5376×4032) S: a (3072×2304)
Reset Custom Functions A6
e_kb487.book Page 35 Wednesday, December 8, 2010 9:49 AM