47
Shooting Functions
3
The following are the available exposure modes.
(z: Available ×: Not available)
Memo
• Set Program Line on the control panel or in the [A2] menu. (z p.R15)
•Set A in the [A4] menu. (z p.R20)
Changing the Exposure Mode
Exposure Mode Function
EV
Compensation
Change Shutter
Speed
Change
Aperture Value
Change
Sensitivity
e
Hyper-program
Automatically sets the shutter speed and aperture value
according to Program Line.
You can use the front and rear e-dials to switch between
shutter priority and aperture priority.
zzzz
K
Sensitivity Priority
You can set the desired sensitivity. z ××
Other than
AUTO
b
Shutter Priority
You can set the desired shutter speed. zz × z
c
Aperture Priority
You can set the desired aperture value. z × zz
L
Shutter & Aperture Priority
Automatically sets the sensitivity according to the set
shutter speed and aperture value.
zzzAUTO only
a
Hyper-manual
You can set all settings. zzz
Other than
AUTO
p
Bulb
Bulb shooting × × z
Other than
AUTO
M
Flash X-sync Speed
The shutter speed is locked at 1/125 seconds. Use this
when using a flash that does not automatically set the
sync speed.
z × z
Other than
AUTO
A
User setting
Lets you capture images with the previously-saved
exposure mode and settings.
––––
e_kb487.book Page 47 Wednesday, December 8, 2010 9:49 AM
To Next Page
Loading...
