R20
Rec. Mode Menu
A
You can select which function settings to save when the camera
is turned off. (The default setting is O (On) for all except HDR
Capture.)
Caution
• This function is not available when the mode dial is set to A.
Memo
• When [Playback Info Disp.] is set to P (Off), the Standard display
is displayed every time the camera is turned on. (z p.17)
• Set [File No.] to O (On) to continue the sequential numbering for
the file name even if a new folder is created. When [File No.] is set
to P, the file number of the first image saved to a folder returns to
0001 each time a new folder is created. In addition, the folder
number is also reset when the first picture is taken with an SD
Memory Card that has no saved images.
• When [Reset] (p.R28) is selected in the [R3] menu, all Memory
settings return to the default settings.
Saves the current camera settings to A on the mode dial.
You can easily retrieve the following saved settings when
shooting.
1 Make the necessary settings.
2 Select [USER] in the [A4]
menu, press the 5 key and
select [Save].
Memory A4
• Flash Mode
• Drive Mode
• White Balance
• Sensitivity
•EV Compensation
• Flash Exposure Compensation
• Auto Bracketing
• HDR Capture
• Playback Info Display
•File No.
USER A4
• Exposure Mode
• Flash Mode/Flash Exposure
Compensation
• Drive Mode
• Custom Image
• Sensitivity/Sensitivity AUTO
Adjustment Range
• White Balance
• D-Range Setting
• EV Compensation
• Exposure Bracketing
• Extended Bracketing
(Bracketing Amount/Type)
• HDR Capture
• Lens Correction
• Program Line
• SD1/SD2 Image File Format
• JPEG Recorded Pixels
• JPEG Quality
• Color Space
• RAW File Format
•[A1-5] menu settings
USER
Save
Check Saved USER Settings
Reset USER Settings
MENU
e_kb487.book Page 20 Wednesday, December 8, 2010 9:49 AM
To Next Page
