Pentax 645D User Manual

30
Getting Started
2
We recommend using the AC adapter kit K-AC50 (optional)
when using the monitor for a long time or when connecting to
your PC or AV equipment.
1 Make sure that the camera is turned off.
2 Open the terminal cover.
3 Face the 2 mark on the DC
terminal of the AC adapter
towards the 2 mark on the
camera, and connect the DC
terminal to the DC input
terminal of the camera.
4 Connect the AC plug cord to the AC adapter, and
then plug the AC plug cord into the power outlet.
Memo
• Make sure the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that all the terminals are securely connected. The SD
Memory Card and data may become corrupted if the connection is
dropped while the camera is accessing the SD Memory Card.
• The battery in your camera will not charge when connected to the
AC adapter.
• Be sure to read the AC adapter kit K-AC50 Operating Manual when
using the AC adapter.
Using the AC Adapter (Optional)
e_kb487.book Page 30 Wednesday, December 8, 2010 9:49 AM

Pentax 645D Specifications

General

Sensor Type	CCD
Sensor Size	44 x 33 mm
Effective Pixels	40 megapixels
Autofocus Points	11
Image Processor	PRIME II
Continuous Shooting Speed	1.1 fps
Screen Size	3.0 inches
Screen Resolution	921, 000 dots
Viewfinder Type	Pentaprism
Viewfinder Coverage	98%
Storage Media	Dual SD/SDHC card slots
Dimensions	156 x 117 x 119 mm
Camera Type	Digital SLR
Shutter Speed	1/4000 to 30 sec
Battery Type	Rechargeable Lithium-Ion Battery
Weight	1480 g