Pentax 645D User Manual

78
Playback and Processing Functions
4
DPOF Settings
DPOF (Digital Print Order Format) settings allow you to specify
the number of copies and whether to imprint the date.
Memo
• DPOF settings cannot be applied to RAW images.
• You can make DPOF settings for up to 999 images on each SD
Memory Card.
1 Select r (DPOF) in the playback mode palette.
2 Select [Single Image] or [All Images].
If [All Images] is selected, proceed to Step 4.
3 Use the 45 keys to select an image to set DPOF
settings.
4 Use the 23 keys to select
the number of copies.
You can set up to 99 copies.
To cancel the DPOF setting, set the
number of copies to [00].
5 Turn the S dial to select O or P for printing the
date.
O: The date will be printed.
P : The date will not be printed.
Repeat Steps 3 to 6 to set other images.
6 Press the 4 button.
The DPOF settings are saved.
Caution
• You cannot switch between the SD Memory Cards while making
the DPOF settings.
• Depending on the printer, the date may not be printed even if you
select O in Step 5.
• The number of copies specified for the All Images setting applies
to all the images, and the Single Image setting is canceled.
OK
OK
Date
Date
OK
MENU
00
00
Copies
Copies
Date
Date
100-0105
100-0105
1
e_kb487.book Page 78 Wednesday, December 8, 2010 9:49 AM

Pentax 645D Specifications

General

Sensor Type	CCD
Sensor Size	44 x 33 mm
Effective Pixels	40 megapixels
Autofocus Points	11
Image Processor	PRIME II
Continuous Shooting Speed	1.1 fps
Screen Size	3.0 inches
Screen Resolution	921, 000 dots
Viewfinder Type	Pentaprism
Viewfinder Coverage	98%
Storage Media	Dual SD/SDHC card slots
Dimensions	156 x 117 x 119 mm
Camera Type	Digital SLR
Shutter Speed	1/4000 to 30 sec
Battery Type	Rechargeable Lithium-Ion Battery
Weight	1480 g