131
Shooting Functions
4
4
Press the 4 button.
The camera returns to the status screen and is ready to take pictures
continuously.
5
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when focused.
6
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully
pressed. Take your finger off the shutter release button to stop.
• If AF Mode is set to l (Single mode), the focus position is locked on the
first frame and pictures are taken continuously at the same interval.
• The shutter cannot be released until charging is complete when using the
built-in flash. You can set the camera to enable shutter release before the
built-in flash is ready in [14. Release when Charging] in the [A Custom
Setting 2] menu. (p.71)
• Select a setting other than g or h in the [Drive Mode] screen to cancel
continuous shooting. The setting is canceled when the camera is turned off if
[Drive Mode] in [Memory] (p.229) of the [A Rec. Mode 3] menu is set to P
(Off).
To Next Page
Loading...
Need help?
General
