Pentax K-m/K2000 User Manual

137
Using the Flash
5
1 Set the mode dial to b.
b (Shutter Priority) mode is set.
2 Use the e-dial to set the shutter speed.
The background is not properly exposed if aperture value is blinking
when shutter speed is set. Set the shutter speed so that aperture value
does not blink.
3 Press the K button.
The flash pops up.
4 Take a picture.
1 Set the mode dial to a.
a (Manual) mode is set.
2 Set the shutter speed and aperture value to obtain correct
exposure.
Set 1/180 sec. shutter speed or slower.
3 Press the K button.
The flash pops up.
In a (Manual) mode, you can raise the flash at any time prior to shooting.
4 Take a picture.
Using b (Shutter Priority) Mode
Using a (Manual) Mode

Pentax K-m/K2000 Specifications

General

Brand	Pentax
Model	K-m/K2000
Category	Digital Camera
Language	English