24
Before Using Your Camera
1
The camera switches display information when you press the M
button during playback.
• Settings that cannot be changed due to the current camera setup cannot be
selected.
• The status screen will disappear after the time set for [3. Meter Operating
Time] in the [A Custom Setting 1] menu (the default setting is 10 seconds).
Press the M button to display it again.
• When the [21. Display status] setting in the [A Custom Setting 3] menu is set
to Off, the status screen is displayed only when the M button is pressed.
(p.221)
Playback Mode
Standard Captured images and indicators are displayed.
Histogram display Images and histogram (Brightness/RGB) are displayed.
Detailed information
display
Detailed showing of how and when the images were taken
is displayed.
No info. display Only captured images are displayed.
The information that is shown first during playback is the same as that of the
last playback in the previous session. The [Standard] screen can always be
displayed first by setting [Playback Display] to P (Off) in [Memory] (p.229) in
the [A Rec. Mode 3] menu.
100-0001
100-0001
RGB
RGB
JPEG
JPEG
ISO
G2
A1
AF.S
AF.S
100-0001
100-0001
1/2000
1/2000
+1.5
+1.5
F2.8
-
0.5
-
0.5
10
10
: 39
10 : 39
AM
AM
ISO
G2
A1
± 0±0
± 0±0
± 0±0
± 0±0
F2.8
24mm
200
200
AdobeRGB
AdobeRGB
/ /07
07
07 07 2008
/2008/
100-0001
100-0001
1/2000
F2.8
1/2000
F2.8
PP
Standard
M
M
M
M
No info. display Detailed information display
Histogram display
To Next Page
Loading...
Need help?
General
