Pentax R-2500DN Series - Page 75

74
13. Cross Line Type
Define the type of the cross line: [Cross] or [ Square].
The default setting is [Cross].
Example: Type of Cross Line
14. DataDisp
Define if the calendar information and survey information are
displayed or not when the image is reproduced by Replay or
Slide Show: [ON] or [OFF]. The default setting is [ON].
Example: Image without / with DataDisp
The information shown on the screen is not recorded with the image and is not tranferred to
the external devices: display only.
15. Auto Snap
Define if the shot is automatically carried out, or not: [OFF] or
[ON]. The default setting is [ON].
When entering special function while [Auto Snap] is set to [ON], the camera is automatically
activated and takes pictures at the scene where taking pictures is needed
Set this setting always [ON], when a photo needs to be taken together with the distance
measurement in the View1/2 screen.
SquareCross
DataDispON
DataDispOFF
X1.CrossXXXXX
2.Square
1.OFF
a2.ONa
1.OFF
a2.ONa