Quantum GX2 microCT Imaging System Manual Chapter 5 | Working With Databases and Data 38
Workstation Setup
1. Manually create the folder "D:\RigakuApplicationData".
2. Install the Quantum GX Analysis Software on the analysis workstation using the software
installer.
3. Launch the database.
Graphics card The following graphics cards are
supported:
NVidia GeForce GTX 680, 2048MB
GDDR5
NVidia GeForce GTX 770, 2GB
GDDR5
NVidia GeForce GTX 980, 4096 MB,
256 bit GDDR5 (for example, EVGA
GeForce GTX 980 4GB GAMING,
Silent Cooling Graphics Card 04G-
P4-2980-KR)
Graphics board OpenGL2.0 or later, graphic memory
of 1GB or more
NVIDIA GeForce GTX680 or later
or
Quadro K2000 or later
Graphic memory 1.5GB or more
Driver Ver.378.49 or later (GeForce
type)
or
Driver Ver.376.62 or later (Quadro
type)
USB port One or more USB2.0 ports.
Note: USB port for keyboard, mouse
and one extra port required.
One or more USB2.0 ports.
Note: USB port for keyboard, mouse
and one extra port required.
Monitor resolution 1920 × 1080 or more 1920 × 1080 or more
D drive Drive with sufficient storage (at least
1TB is recommended) that is
formatted with a file system capable
of handling single files larger than
10GB (e.g. NTFS)
RAM 16GB
NOTE: A hard drive labeled as "D:" is required and can be created as a partition on another hard
drive if necessary.
Table 5.1 Workstation Requirements for Offline Analyses (continued)
Requirement
Software
To Next Page
Loading...
Need help?
General