Quantum GX2 microCT Imaging System Manual Chapter 5 | Working With Databases and Data 39
This creates a folder structure on the D: drive that matches the imaging system D: drive
(Figure 5.14). Quantum GX Analysis Software only supports subvolume reconstructions using
folder hierarchies that match what is on the imaging system workstation.
4. Copy a database from the imaging system or data archive to an external medium, for example a
USB external hard drive. See page 35 for instructions.
5. Go to "Data (D:)\RigakuApplicationData\RmCT2\CT_RawData" on the imaging system. Select
and copy the raw data folder(s) of interest to an external medium. Each folder name includes the
date and time of a scan (CR_YearMonthDay_HourMinuteSecond) (Figure 5.15).
6. Copy the raw data folder(s) from the external medium to
"D:\RigakuApplicationData\RmCT2\CT_RawData" on the analysis workstation.
Figure 5.14 Folder Structure on the Analysis Workstation
NOTE: Quantum GX Analysis Software only analyzes image data on the local workstation.
NOTE: Be sure to copy the data folder and its contents, not just the raw data. Otherwise the
workstation will not be able to process the data.
Figure 5.15 Select and Copy Raw Data Folder(s)
To Next Page
Loading...
Need help?
General