Clustering Slave List
284 IOLAN SDS/SCS/STS User’s Guide, Version 3.6
Slave TCP Port Specify the TCP Port number configured on the Slave IOLAN that is
associated to the port number you are configuring.
Range: 1-99999
Master TCP Port Specify the TCP port number you want to map to the Slave IOLAN TCP Port.
User’s will use this TCP port number to access the Slave IOLAN’s port.
Default: 1024, and then increments by one for each new slave entry
Protocol Specify the protocol that will be used to access the port.
Data Options: SSH, Telnet
Default: Telnet
To Next Page
Loading...
