Configuration Methods 63
IOLAN+ Interface
When you select server, the following fields are not available on the Server Configuration menu:
z Debug mode
z CR to initiate
z SNAP encoding
z Boot diagnostics
z NS Port
A new parameter was added, Interface, to the to Port Setup Menu, to specify whether you are setting
up the serial line as a EIA-232 or EIA-422 line.
** Administrator ** SERVER CONFIGURATION REMOTE-ADMIN
Name [wchiewsds2 ] Debug mode N/A
IP address [172.16.22.7 ]
Subnet mask [255.255.0.0 ]
Ethernet address (00:80:d4:88:88:88) Ethernet speed [AUTO ]
Language [English ]
Identification [ ]
Lock [Disabled]
Password limit [3 ]
CR to initiate N/A
SNAP encoding N/A
Boot host [ ] Boot diagnostics N/A
Boot file [ ]
Init file [ ]
MOTD file [ ]
Domain name [ ]
Name server [ ] NS Port N/A
WINS server [ ]
________________________________________________________________________________
To Next Page
Loading...
